2026 Exams4sures EMC D-VXR-DY-23 Dumps and Exam Test Engine
EMC D-VXR-DY-23 DUMPS WITH REAL EXAM QUESTIONS
NEW QUESTION # 36
Which Dell EMC Networking Operating System OS10 CLI command allows the user to confirm that SmartFabric Services have been enabled for a VxRail?
- A. show switch-operating-mode
- B. show access-lists
- C. show interface status
- D. switchport mode access
Answer: A
NEW QUESTION # 37
Which user provided block of IP addresses to the VxRail initialization wizard may contain non-contiguous addresses?
- A. ESXi host
- B. vSphere vMotion
- C. VMware Virtual SAN
- D. NTP Servers
Answer: D
NEW QUESTION # 38
What is the maximum number of supported nodes in a VxRail Stretch Cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 39
An implementation engineer is planning to deploy a new VxRail cluster.
How long is the evaluation period for vSphere licensing on each node?
- A. 60 days after nodes are powered on
- B. 60 days after nodes are delivered
- C. 90 days after nodes are powered on
- D. 90 days after nodes are delivered
Answer: A
NEW QUESTION # 40
Which vCenter object is created automatically when deploying VxRail with an external vCenter Server?
- A. Datacenter
- B. VxRail Management user account
- C. Resource Pool
- D. Cluster
Answer: D
NEW QUESTION # 41
What is the benefit of using WTS in a VxRail Stretched Cluster implementation?
- A. Separation of witness traffic from vSAN data traffic
- B. Access to Windows Terminal Services acceleration module
- C. Service automatically updates the witness appliance
- D. Native implementation of terminal services in a VxRail
Answer: A
NEW QUESTION # 42
An implementation engineer wants to check if the new node they added to the cluster is accessible to VxRail Manager.
What can be used for discovery?
- A. DRS
- B. Marvi
- C. SRS
- D. Loudmouth
Answer: D
NEW QUESTION # 43
During a node add procedure the new node cannot be discovered. A ping to the IPv6 address is responding.
What could be the cause of this issue?
- A. Loudmouth process is not running
- B. Only one network interface is up on the new node
- C. vSAN VLAN is not configured correctly
- D. Management VLAN ID is not set on the vmk0 interface
Answer: B
NEW QUESTION # 44
While preparing for an onsite visit for an installation of a VxRail cluster, a Dell installation engineer is unable to generate a Restricted Procedure in the SolVe Online portal.
What is the cause?
- A. SolVe Online portal has not been updated with the latest procedures
- B. The SolVe Online portal is viewed as a customer
- C. The engineer has not been approved for VxRail procedures in the SolVe Online portal
Answer: B
NEW QUESTION # 45
A VxRail running version 4.7.100 has been deployed in a SmartFabric configuration. The customer needs to set up management of their networking for the Cluster.
What steps are required to complete this task?
- A. Download the OMNI plug-in, enable vCenter, and run the Python script
- B. Download, install the OME plug-in, and run the Python script
- C. Download and install the OMNI plug-in
- D. Download and install OME plug-in
Answer: C
NEW QUESTION # 46
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.
Use the VxRail simulator to describe why the host is Incompatible.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.
- A. Insufficient number of vSphere licenses
- B. bmc and bios are running older versions
- C. Invalid vCenter 5erver license
- D. Firmware of ESXi host needs to be updated
Answer: C
NEW QUESTION # 47
An implementation engineer is tasked with expanding an 8-node VxRail E560 cluster with an S570 node. Each node has 1GbE RJ45 ports.
What must the engineer consider when expanding the cluster?
- A. AMD- and Intel-based nodes cannot be mixed
- B. All nodes in the cluster must be the identical series
- C. Node limit has been reached on the cluster
- D. E Series nodes require more capacity before expansion
Answer: C
NEW QUESTION # 48
What network setting is the optional configuration on the port group for a customer-supplied VDS before the VxRail cluster is deployed?
- A. Assign NIC uplinks
- B. Enable and configure NIOC
- C. Enable NIC teaming and failover
- D. Configure NIC teaming and failover
Answer: B
NEW QUESTION # 49
Once a VxRail cluster has been acquired, what is the correct sequence of steps to deploy it?
Answer:
Explanation:
NEW QUESTION # 50
What is the correct command to restart the Loudmouth process on a VxRail node?
- A. systemctl restart vmware-loudmouth
- B. /sbin/service loudmouth restart
- C. /etc/init.d/loudmouth restart
- D. /usr/lib/vmware-loudmouth/bin/loudmouthc restart
Answer: C
NEW QUESTION # 51
What is a requirement to set up a supported VxRail Stretched Cluster?
- A. All-Flash configuration
- B. G560 with one chassis
- C. Identical VxRail nodes
- D. VxRail nodes with 10 GbE
Answer: D
NEW QUESTION # 52
A customer is deploying a VxRail cluster in their datacenter and will be deploying other VxRail clusters in the coming months.
Which vCenter deployment option will be excluded from the VxRail Lifecycle software updates?
- A. Existing VxRail-managed vCenter Server
- B. Internal VxRail-managed vCenter Server
- C. Existing Customer-supplied vCenter Server
Answer: C
NEW QUESTION # 53
When preparing for a VxRail deployment, which components require forward and reserve DNS records?
- A. Platform Services Controller. vCenter, and ESRS/VE
- B. ESXi Hosts, vCenter, and ESRS/VE
- C. ESXi hosts, vRealize Log Insight, and Platform Services Controller
- D. ESXi hosts, vCenter, and vRealize Operations
Answer: C
NEW QUESTION # 54
A planned VxRail Stretched Cluster will have four All-Flash nodes at each site What is the recommended storage policy to ensure cross-site and local protection, using storage as efficiently as possible?
- A. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-1 (Mirroring)
- B. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
- C. Site disaster tolerance - Dual site mirroring (stretched cluster) Failures to tolerate - no data redundancy
- D. Site disaster tolerance - None - keep data on Preferred (stretched cluster) Failures to tolerate - 1 failure - RAID-5 (Erasure Coding)
Answer: B
NEW QUESTION # 55
......
2026 New Exams4sures D-VXR-DY-23 PDF Recently Updated Questions: https://www.exams4sures.com/EMC/D-VXR-DY-23-practice-exam-dumps.html
D-VXR-DY-23 Exam with Guarantee Updated 375 Questions: https://drive.google.com/open?id=1ENZCkAS36crc4Ah7wv2WOeZ7dXZXUSFw