[Feb 16, 2026] Valid D-PST-OE-23 Test Answers & EMC D-PST-OE-23 Exam PDF
Realistic D-PST-OE-23 Exam Dumps with Accurate & Updated Questions
NEW QUESTION # 57
How should the schedule for remote replications be determined in PowerStore environments?
- A. Based on the RPO and RTO (Recovery Time Objective) requirements of the business
- B. Randomly, to distribute load evenly over time
- C. Based on peak business hours to maximize bandwidth usage
- D. According to the least critical data's availability requirements
Answer: A
NEW QUESTION # 58
How frequently should snapshot schedules be reviewed and adjusted for file storage resources in PowerStore to ensure optimal data protection?
- A. As business needs change
- B. Never, once set, they should remain static
- C. Daily
- D. Yearly
Answer: A
NEW QUESTION # 59
Which client access protocol provides native file sharing support for Windows clients in PowerStore?
- A. AFP
- B. FTP
- C. SMB
- D. NFS
Answer: C
NEW QUESTION # 60
Refer to the exhibit.
What is the result of the network configuration shown for a Dell PowerStore T?
- A. Ports 1/1/55 and 1/1/56 are added to the VLTi domain
- B. Interfaces are configured for remote replication traffic
- C. Interfaces are configured for PowerStore discovery traffic
- D. Ports 1/1/55 and 1/1/56 are added to a new LACP domain
Answer: A
Explanation:
1. Run vlt-domain <ID> to create a new VLTi domain.
2. Run discovery-interface ethernet chassis/slot/portchassis/slot/port to add the two VLTi ports to the new domain. 3. Run backup destination <IP address of the other switch> to set the other switch as VLT backup, which is required for VLT heartbeat. #(conf-range-eth1/1/55-1/1/56) vlt-domain 1 #(conf-vlt-1) discovery- interface ethernet 1/1/55-1/1/56 #(conf-vlt-1) backup destination 172.17.57.30
NEW QUESTION # 61
What are the recommended number of network switches in a Dell PowerStore T environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Reference: https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-9000t/pwrstr-ntwk-plang/ powerstore-t-model-appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b&lang=en-us
NEW QUESTION # 62
In configuring host access to block storage, what practices enhance security and efficiency? Select all that apply.
- A. Regularly changing host IP addresses
- B. Implementing multipathing
- C. Enforcing strict access controls based on host roles
- D. Using dedicated networks for storage traffic
Answer: B,C,D
NEW QUESTION # 63
Which of the following scenarios are ideal for deploying PowerStore systems? Select all that apply.
- A. Media streaming services
- B. Long-term archival storage
- C. High-performance computing tasks
- D. Virtual desktop infrastructure (VDI)
Answer: C,D
NEW QUESTION # 64
What describes Dell PowerStore heat dissipation?
- A. Lower model numbered systems have lower heat dissipation specifications than higher model numbered systems
- B. Higher model numbered systems have lower heat dissipation specifications than lower model numbered systems
- C. T systems have higher heat dissipation specifics than X systems
- D. X systems have higher heat dissipation specifics than T systems
Answer: D
NEW QUESTION # 65
For optimal performance, how should ESXi hosts be connected to PowerStore storage?
- A. Through a single active network interface
- B. Directly to the PowerStore appliance without a switch
- C. Using multipathing software
- D. Via a VPN tunnel for security
Answer: C
NEW QUESTION # 66
What is an essential metric for monitoring VMware storage resources on PowerStore?
- A. CPU usage of the ESXi host
- B. Latency and throughput of the storage
- C. The firmware version of PowerStore appliances
- D. The number of active virtual machines
Answer: B
NEW QUESTION # 67
What is a step in configuring the ToR data switches for a Dell PowerStore X?
- A. Configure a port for the discovery laptop
- B. Create VLANs for NAS servers
- C. Configure LACP uplink to management switch
- D. Create node A port-channel
Answer: A
Explanation:
Reference: https://www.dell.com/support/manuals/pk/en/pkbsd1/powerstore-9000t/pwrstr-ntwk-cfg
/configure- port-interfaces-for-powerstore-x-model-node-connectivity?guid=guid-ef6b40ef-82a3-4ebf-99bf- a7bea8d6a586&lang=en-us
NEW QUESTION # 68
What describes the remote replication Planned Failover operation?
- A. Run automatically by the replication destination system before a scheduled source system outage.
- B. Run manually from the replication source system by the administrator before a scheduled source system outage.
- C. Run manually from the replication destination system by the administrator after a planned source system maintenance event.
- D. Run automatically by the replication source system as a result of a planned source system maintenance event.
Answer: B
NEW QUESTION # 69
Which metric is crucial for monitoring the performance of PowerStore block storage resources?
- A. IOPS (Input/Output Operations Per Second)
- B. The number of user accounts
- C. The color depth of stored images
- D. The temperature of the storage environment
Answer: A
NEW QUESTION # 70
Order the NDU operational steps.
Answer:
Explanation:
NEW QUESTION # 71
Which best practice should be followed for successful migration operations in PowerStore?
- A. Encouraging users to continue modifying data during the migration process
- B. Performing a thorough post-migration validation to ensure data accuracy and completeness
- C. Running simultaneous migrations from multiple sources to save time
- D. Limiting network bandwidth to conserve resources during migration
Answer: B
NEW QUESTION # 72
The PowerStore X model is optimized for which of the following environments?
- A. Traditional file storage
- B. Large-scale data warehousing
- C. Containerized applications
- D. High-frequency trading platforms
Answer: C
NEW QUESTION # 73
When applying a protection policy to a file storage resource in PowerStore, which factors should be considered? Select all that apply.
- A. Data replication frequency
- B. Client access protocols
- C. Snapshot schedule
- D. Storage tiering preferences
Answer: A,C
NEW QUESTION # 74
In PowerStore, what is a key feature of file storage management?
- A. Automatic conversion of files to block data
- B. Support for NFS and SMB protocols
- C. Support for block-level storage only
- D. Inability to scale beyond petabyte capacity
Answer: B
NEW QUESTION # 75
Which component is only replaceable by qualified personnel?
- A. Memory module
- B. Embedded I/O module
- C. Battery backup unit
- D. 4-Port mezzanine card
Answer: A
NEW QUESTION # 76
......
D-PST-OE-23 Exam Dumps - PDF Questions and Testing Engine: https://www.exams4sures.com/EMC/D-PST-OE-23-practice-exam-dumps.html
D-PST-OE-23 Dumps - The Sure Way To Pass Exam: https://drive.google.com/open?id=1BOeEhexae0MsSU9FOb7RH3BvfRgtLf01