2021 Realistic NSE7_PBC-6.4 Dumps Latest Fortinet Practice Tests Dumps [Q11-Q28]

Share

2021 Realistic NSE7_PBC-6.4 Dumps Latest Fortinet Practice Tests Dumps

NSE7_PBC-6.4 Dumps PDF - NSE7_PBC-6.4 Real Exam Questions Answers


Fortinet NSE7_PBC-6.4 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Configure resilience
  • availability, Transit VNet, load balancing, east-west inspection
  • Fortinet Solution for Amazon Web Services (AWS)
Topic 2
  • Apply auto scaling, resilience
  • availability, transit VPCs, load balancing
  • Identify Azure Security Center, Azure Stack
Topic 3
  • Identify traffic patterns, MPLS, IPsec, and dedicated interconnection
  • Deploy FortiGate in GCP
Topic 4
  • Review FortiCASB architecture and supported applications
  • Fortinet Solution for Google Cloud Platform (GCP)
Topic 5
  • Choose Fortinet products licensing in Azure Marketplace: PAYG, BYOL
  • Identify traffic patterns, MPLS, IPsec, Direct Connect

 

NEW QUESTION 11
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

  • A. A multiple VPC deployment utilizing a transit gateway
  • B. A single VPC deployment with multiple subnets
  • C. A multiple VPC deployment utilizing a transit VPC topology
  • D. A single VPC deployment with multiple subnets and a NAT gateway

Answer: B,C

 

NEW QUESTION 12
You need to deploy FortiGate VM devices in a highly available topology in the Microsoft Azure cloud. The following are the requirements of your deployment:
* Two FortiGate devices must be deployed; each in a different availability zone.
* Each FortiGate requires two virtual network interfaces: one will connect to a public subnet and the other will connect to a private subnet.
* An external Microsoft Azure load balancer will distribute ingress traffic to both FortiGate devices in an active- active topology.
* An internal Microsoft Azure load balancer will distribute egress traffic from protected virtual machines to both FortiGate devices in an active-active topology.
* Traffic should be accepted or denied by a firewall policy in the same way by either FortiGate device in this topology.
Which FortiOS CLI configuration can help reduce the administrative effort required to maintain the FortiGate devices, by synchronizing firewall policy and object configuration between the FortiGate devices?

  • A. config system ha
  • B. config system sdn-connector
  • C. config system auto-scale
  • D. config system session-sync

Answer: A

 

NEW QUESTION 13
Refer to the exhibit.

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)

  • A. The Internet gateway (IGW) is not added to VPC (virtual private cloud).
  • B. AWS source and destination checks are enabled on the FortiGate interfaces.
  • C. AWS security groups may be blocking the traffic.
  • D. The web servers are not configured with the default gateway.

Answer: C,D

 

NEW QUESTION 14
Which statement about FortiSandbox in Amazon Web Services (AWS) is true?

  • A. FortiSandbox in AWS uses Windows virtual machines (VMs) to inspect files.
  • B. In AWS, virtual machines (VMs) that inspect files do not have to be reset after inspecting a file.
  • C. FortiSandbox in AWS can have a maximum of eight virtual machines (VMs) that inspect files.
  • D. In AWS, virtual machines (VMs) that inspect files are constantly up and running.

Answer: D

 

NEW QUESTION 15
An organization deploys a FortiGate-VM (VM04 / c4.xlarge) in Amazon Web Services (AWS) and configures two elastic network interfaces (ENIs). Now, the same organization wants to add additional ENIs to support different workloads in their environment.
Which action can you take to accomplish this?

  • A. Create the ENI and attach it to FortiGate.
  • B. Create the ENI, attach it to FortiGate, and then restart FortiGate.
  • C. None, you cannot create and add additional ENIs to an existing FortiGate-VM.
  • D. Create the ENI, shut down FortiGate, attach the ENI to FortiGate, and then start FortiGate.

Answer: D

 

NEW QUESTION 16
You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guardduty script to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?

  • A. GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.
  • B. Inspector, Shield, GuardDuty, S3, and DynamoDB.
  • C. WAF, Shield, GuardDuty, S3, and DynamoDB.
  • D. GuardDuty, CloudWatch, S3, and DynamoDB.

Answer: A

 

NEW QUESTION 17
Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

  • A. A multiple VPC deployment utilizing a transit gateway
  • B. A single VPC deployment with multiple subnets
  • C. A multiple VPC deployment utilizing a transit VPC topology
  • D. A single VPC deployment with multiple subnets and a NAT gateway

Answer: B,C

Explanation:
Explanation/Reference: https://www.fortinet.com/content/dam/fortinet/assets/white-papers/wp-aws-reference- architecture.pdf

 

NEW QUESTION 18
You have been tasked with deploying FortiGate VMs in a highly available topology on the Amazon Web Services (AWS) cloud. The requirements for your deployment are as follows:
* You must deploy two FortiGate VMs in a single virtual private cloud (VPC), with an external elastic load balancer which will distribute ingress traffic from the internet to both FortiGate VMs in an active-active topology.
* Each FortiGate VM must have two elastic network interfaces: one will connect to a public subnet and other will connect to a private subnet.
* To maintain high availability, you must deploy the FortiGate VMs in two different availability zones.
How many public and private subnets will you need to configure within the VPC?

  • A. Two public subnets and one private subnet
  • B. Two public subnets and two private subnets
  • C. One public subnet and one private subnet
  • D. One public subnet and two private subnets

Answer: D

 

NEW QUESTION 19
An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?

  • A. They cannot create and add additional vNICs to an existing FortiGate-VM.
  • B. They can create additional vNICs in the UI console.
  • C. They can use the Compute Engine API Explorer.
  • D. They can create additional vNICs using the Cloud Shell.

Answer: C

 

NEW QUESTION 20
Refer to the exhibit.

You are configuring an active-passive FortiGate clustering protocol (FGCP) HA configuration in a single availability zone in Amazon Web Services (AWS), using a cloud formation template.
After deploying the template, you notice that the AWS console has IP information listed in the FortiGate VM firewalls in the HA configuration. However, within the configuration of FortiOS, you notice that port1 is using an IP of 10.0.0.13, and port2 is using an IP of 10.0.1.13.
What should you do to correct this issue?

  • A. Delete the deployment and start again. You have in put the wrong parameters during the cloud formation template deployment.
  • B. Nothing, in AWS cloud, it is normal for a FortiGate ENI primary IP address to be different than the FortiOS IP address configuration.
  • C. Configure FortiOS to use DHCP so that it will get the correct IP addresses on the ports.
  • D. Configure FortiOS to use static IP addresses with the IP addresses reflected in the ENI primary IP address configuration (as per the exhibit).

Answer: C

 

NEW QUESTION 21
A company deployed a FortiGate-VM with an on-demand license using Amazon Web Services (AWS) Market Place Cloud Formation template. After deployment, the administrator cannot remember the default admin password.
What is the default admin password for the FortiGate-VM instance?

  • A. The admin password cannot be recovered and the customer needs to deploy the FortiGate-VM again.
  • B. <blank>
  • C. The instance-ID value
  • D. admin

Answer: C

Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/aws-cookbook/828256/connecting-to-the- fortigate-vm

 

NEW QUESTION 22
Which three properties are configurable Microsoft Azure network security group rule settings? (Choose three.)

  • A. Action
  • B. Destination port ranges
  • C. Source port ranges
  • D. Sequence number
  • E. Source and destination IP ranges

Answer: A,B,C

 

NEW QUESTION 23
What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

  • A. Up to 10 Gbps per attachment
  • B. Up to 1 Gbps per attachment
  • C. Up to 1.25 Gbps per attachment
  • D. Up to 50 Gbps per attachment

Answer: C

 

NEW QUESTION 24
Which two statements about the Amazon Cloud Services (AWS) network access control lists (ACLs) are true?
(Choose two.)

  • A. Network ACLs must be manually applied to virtual network interfaces.
  • B. Network ACLs support allow rules and deny rules.
  • C. Network ACLs are stateless, and inbound and outbound rules are used for traffic filtering.
  • D. Network ACLs are stateful, and inbound and outbound rules are used for traffic filtering.

Answer: B,C

Explanation:
Explanation/Reference: https://docs.aws.amazon.com/vpc/latest/userguide/vpc-network-acls.html

 

NEW QUESTION 25
You have been asked to secure your organization's salesforce application that is running on Microsoft Azure, and find an effective method for inspecting shadow IT activities in the organization. After an initial investigation, you find that many users access the salesforce application remotely as well as on-premises.
Your goal is to find a way to get more visibility, control over shadow IT-related activities, and identify any data leaks in the salesforce application.
Which three steps should you take to achieve your goal? (Choose three.)

  • A. Configure FortiCASB and set up access rights, privileges, and data protection policies.
  • B. Use FortiGate, FortiGuard, and FortiAnalyzer solutions.
  • C. Deploy and configure FortiCWP with a workload guardian license.
  • D. Deploy and configure FortiCASB with a Fortinet FortiCASB subscription license.
  • E. Deploy and configure FortiGate with Security Fabric solutions, and FortiCWP with a storage guardian advance license.

Answer: A,B,D

 

NEW QUESTION 26
Refer to the exhibit.

Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.
How do you resolve this issue?

  • A. In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.
  • B. Run diagnose debug application azd -l on FortiGate.
  • C. In the Microsoft Azure portal, set the correct tag values for the windows server.
  • D. Delete the address object and recreate a new address object with the type set to FQDN.

Answer: A

 

NEW QUESTION 27
Refer to the exhibit.

In your Amazon Web Services (AWS) virtual private cloud (VPC), you must allow outbound access to the internet and upgrade software on an EC2 instance, without using a NAT instance. This specific EC2 instance is running in a private subnet: 10.0.1.0/24.
Also, you must ensure that the EC2 instance source IP address is not exposed to the public internet. There are two subnets in this VPC in the same availability zone, named public (10.0.0.0/24) and private (10.0.1.0/24).
How do you achieve this outcome with minimum configuration?

  • A. Deploy a NAT gateway with an EIP in the private subnet, edit the public main routing table, and change the destination route 0.0.0.0/0 to the target NAT gateway.
  • B. Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Public-route, and delete the route destination 10.0.0.0/16 to target local.
  • C. Deploy a NAT gateway with an EIP in the private subnet, edit route tables, select Private-route, and add a new route destination 0.0.0.0/0 to the target internet gateway.
  • D. Deploy a NAT gateway with an EIP in the public subnet, edit route tables, select Private-route and add a new route destination 0.0.0.0/0 to target the NAT gateway.

Answer: C

 

NEW QUESTION 28
......

NSE7_PBC-6.4 Premium Exam Engine pdf Download: https://www.exams4sures.com/Fortinet/NSE7_PBC-6.4-practice-exam-dumps.html

NSE7_PBC-6.4 Exam [2021] Dumps Fortinet PDF Questions: https://drive.google.com/open?id=19GdnV4TP9V9u1-QDobwI3Ycj9JGW0R1d