Get 100% Success with Latest CCNA 200-301 Exam Dumps Sep 12, 2026
The Best 200-301 Exam Study Material and Preparation Test Question Dumps
Understanding functional and technical aspects of 200-301 CCNA Exam: Cisco Certified Network Associate Network IP Connectivity
The following will be discussed here:
- Configure and verify IPv4 and IPv6 static routing
- Determine how a router makes a forwarding decision by default
- Administrative distance
- Metric
- Administrative distance
- Network route
- Broadcast (DR/BDR selection)
- Point-to-point
- Routing protocol code
- Router ID
- Default route
- Longest match
- Host route
Cisco 200-301 certification exam is an entry-level exam that is suitable for individuals with little or no experience in the networking industry. It provides a solid foundation for individuals seeking to pursue advanced certifications in networking, such as the Cisco Certified Network Professional (CCNP) and Cisco Certified Internetwork Expert (CCIE). Cisco Certified Network Associate Exam certification demonstrates that the candidate has the essential knowledge and skills required to design, implement, and troubleshoot network infrastructures.
NEW QUESTION # 30
What is the role of the root port in a switched network?
- A. It replaces the designated port when the designated port fails
- B. It replaces the designated port when the root port fails.
- C. It is administratively disabled until a failover occurs.
- D. It is the best path to the root from a nonroot switch.
Answer: D
Explanation:
It is the best path to the root from a nonroot switch.. Layer 2 switching behavior is driven by VLAN membership, MAC learning, trunk encapsulation, STP state, and EtherChannel negotiation. Cisco switches learn source MAC addresses on ingress, flood unknown unicasts within the same VLAN, and forward known unicasts only out the port associated with the destination MAC address. Trunk and EtherChannel questions must be solved on the logical interface and with the correct negotiation protocol: LACP uses active/passive, PAgP uses desirable/auto, and static mode uses on. STP and PortFast questions depend on whether the port is intended for an endpoint or part of the switched topology. The wrong choices usually apply the correct feature to the wrong port type or violate the required negotiation behavior. Cisco CCNA 200-301 v1.1 emphasizes these details because a single incorrect Layer 2 setting can create loops, VLAN leaks, or failed host connectivity. The selected answer matches Cisco switching operation.
NEW QUESTION # 31
Which configuration ensures that the switch is always the root for VLAN 750?
- A. Switch(config)#spanning-tree vlan 750 priority 38003685
- B. Switch(config)#spanning-tree vlan 750 root primary
- C. Switch(config)#spanning-tree vlan 750 priority 614440
- D. Switch(config)#spanning-tree vlan 750 priority 0
Answer: D
Explanation:
Explanation
Although the spanning-tree vlan 10 root primary command will ensure a switch will have a bridge priority value lower than other bridges introduced to the network, the spanning-tree vlan 10 priority 0 command ensures the bridge priority takes precedence over all other priorities.
NEW QUESTION # 32
Refer to the exhibit. An engineer must configure router R2 so it is elected as the DR on the WAN subnet.
Which command sequence must be configured?
- A. interface gigabitethernet0/0
ip address 10.0.0.34 255.255.255.248
ip ospf priority 0 - B. interface gigabitethernet0/0
ip address 10.0.1.1 255.255.255.0
ip ospf priority 255 - C. interface gigabitethernet0/0
ip address 10.0.1.1 255.255.255.224
ip ospf priority 98 - D. interface gigabitethernet0/0
ip address 10.0.0.34 255.255.255.224
ip ospf priority 100
Answer: D
Explanation:
Priority in OSPF is mainly used to influence/determine a designated router/backup designated router for a network. By default, the priority is 1 on all routers. A router with a high priority will always win the DR/BDR election process. However, you can make a router not participate in the election at all if you configure the priority to 0. This is mainly useful on frame relay networks where you would want the hub to be the DR always. To set the router priority, use the ip ospf priority <value> command in interface configuration mode.
NEW QUESTION # 33
How does HSRP provide first hop redundancy?
- A. It uses a shared virtual MAC and a virtual IP address to a group of routers that serve as the default gateway for hosts on a LAN
- B. It load-balances Layer 2 traffic along the path by flooding traffic out all interfaces configured with the same VLAN.
- C. It load-balances traffic by assigning the same metric value to more than one route to the same destination m the IP routing table.
- D. It forwards multiple packets to the same destination over different routed links n the data path
Answer: A
Explanation:
Use D for this item. HSRP provides first-hop redundancy by giving a group of routers a shared virtual IP address and virtual MAC address. Hosts use the virtual IP as their default gateway; the active router forwards traffic and the standby router takes over if the active fails. In Cisco CCNA 200-301 v1.1, IP Connectivity questions frequently test the practical boundary between similar features: what the feature does, where it is configured, and what problem it is meant to solve. HSRP is not route load balancing, Layer 2 flooding, or per- packet distribution across routed links. A clean way to validate the answer is to map the wording of the scenario to the actual device function. If the feature supplies addressing, forwarding, authentication, trunking, route selection, or controller communication, the answer must match that function exactly rather than a nearby protocol name.
NEW QUESTION # 34
Drag and drop the statements about networking from me left onto the corresponding networking types on the right
Answer:
Explanation:
NEW QUESTION # 35
Refer to the exhibit.
Which outcome is expected when PC_A sends data to PC_B?
- A. The source and destination MAC addresses remain the same.
- B. The switch rewrites the source and destination MAC addresses with its own.
- C. The destination MAC address is replaced with ffff.ffff.ffff.
- D. The source MAC address is changed.
Answer: A
NEW QUESTION # 36
Standard industrialized protocol of etherchannel?
- A. PAGP
- B. PRP
- C. REP
- D. LACP
Answer: D
NEW QUESTION # 37
Refer to the exhibit.
An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right.
Answer:
Explanation:
NEW QUESTION # 38
A network engineer must back up 20 network router configurations globally within a customer environment. Which protocol allows the engineer to perform this function using the Cisco IOS MIB?
- A. CDP
- B. SMTP
- C. SNMP
- D. ARP
Answer: C
Explanation:
SNMP is an application-layer protocol that provides a message format for communication between SNMP managers and agents. SNMP provides a standardized framework and a common language used for the monitoring and management of devices in a network. The SNMP framework has three parts: + An SNMP manager + An SNMP agent + A Management Information Base (MIB) The Management Information Base (MIB) is a virtual information storage area for network management information, which consists of collections of managed objects. With SNMP, the network administrator can send commands to multiple routers to do the backup
NEW QUESTION # 39
What is a similarity between OM3 and OM4 fiber optic cable?
- A. Both have a 62.5 micron core diameter
- B. Both have a 50 micron core diameter
- C. Both have a 9 micron core diameter
- D. Both have a 100 micron core diameter
Answer: B
NEW QUESTION # 40
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Answer:
Explanation:
Explanation
Graphical user interface, application Description automatically generated
NEW QUESTION # 41
Refer to the exhibit. An administrator is tasked with configuring a voice VLAN. What is the expected outcome when a Cisco phone is connected to the GigabitEthernet 3/1/4 port on a switch?
- A. The phone sends and receives data in VLAN 50, but a workstation connected to the phone sends and receives data in VLAN 1.
- B. The phone and a workstation that is connected to the phone send and receive data in VLAN 50.
- C. The phone sends and receives data in VLAN 50, but a workstation connected to the phone has no VLAN connected.
- D. The phone and a workstation that is connected to the phone do not have VLAN connectivity.
Answer: A
NEW QUESTION # 42
Which security program element involves installing badge readers on data-center doors to allow workers to enter and exit based on their job roles?
- A. role-based access control
- B. physical access control
- C. biometrics
- D. multifactor authentication
Answer: B
Explanation:
Answer D is the technically correct selection. Badge readers on data-center doors are physical access control.
They regulate who can enter protected spaces based on identity, role, and authorization. This aligns with Cisco CCNA 200-301 v1.1 because the exam blueprint requires engineers to recognize operational behaviour from configuration symptoms and topology requirements. RBAC can influence the policy, biometrics can be a factor, and MFA can strengthen authentication, but the control described is physical facility access. Treat the distractors carefully: most are real Cisco terms, but they solve a different problem or operate at a different layer. The selected answer is the one that would be used by an engineer on the device or in the design to produce the outcome stated in the question.
NEW QUESTION # 43 
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 44 
Refer to the exhibit. What is the administrative distance for the advertised prefix that includes the host IP addressss 192.168.20.1?
- A. 0
- B. 1
- C. 2
- D. 192.168.10.2
Answer: A
Explanation:
1. Cisco routing logic is deterministic: a router first matches the most specific destination prefix, then uses administrative distance when competing route sources advertise the same prefix, and finally evaluates the protocol metric when multiple paths remain inside the same routing protocol. First-hop redundancy protocols add a separate default-gateway resiliency function for hosts on a LAN. The other choices in this question either point to the wrong route-selection rule, confuse a protocol metric with administrative distance, or apply a Layer 2 concept where a Layer 3 forwarding decision is required. In production, that mistake would create blackholing, asymmetric routing, or a backup path that never activates. Cisco CCNA 200-301 v1.1 tests this because route selection is fundamental to troubleshooting reachability. The selected answer matches the behavior Cisco routers use when forwarding traffic or maintaining gateway redundancy.
NEW QUESTION # 45
Which statement about system time and NTP server configuration with Cisco ISE is true?
- A. The system time can be configured centrally on the Cisco ISE, but NTP server settings must be configured individually on each ISE node.
- B. The system time and NTP server settings can be configured centrally on the Cisco ISE.
- C. The system time and NTP server settings must be configured individually on each ISE node.
- D. NTP server settings can be configured centrally on the Cisco ISE, but the system time must be configured individually on each ISE node.
Answer: C
NEW QUESTION # 46
Which AP mode wirelesssly connects two separate network segments each set up within a different campus building?
- A. mesh
- B. local
- C. bridge
- D. point-to-point
Answer: C
Explanation:
bridge. Cisco wireless design separates RF behavior, client authentication, encryption, AP operating mode, and controller management. A WLC centralizes WLAN configuration and AP control, while lightweight APs use CAPWAP to register and exchange control/data information with the controller. Security choices such as WPA2/AES and WPA3/SAE are not interchangeable with older mechanisms such as WEP, TKIP, or RC4. RF questions also depend on channel planning: adjacent cells should avoid overlapping channels, and 5-GHz preference features reduce congestion in the 2.4-GHz band. The incorrect options generally confuse AP mode, authentication, encryption, or controller responsibilities. Cisco CCNA 200-301 v1.1 includes these items because wireless failures often come from using the right-looking feature in the wrong part of the WLAN design. The selected answer is the Cisco-consistent configuration or behavior for this wireless scenario.
NEW QUESTION # 47
Refer to the exhibit.
What is the subnet mask for route 172.16.4.0?
- A. 255.255.240.0
- B. 255.255.255.192
- C. 255.255.248.0
- D. 255.255.254.0
Answer: C
NEW QUESTION # 48
Refer to the exhibit.
Which configuration establishes a Layer 2 LACP EtherChannel when applied to both switches?
- A. Interface range G1/1 - 1/3 switchport mode trunk channel-group 1 mode active no shutdown
- B. Interface range G1/1 - 1/3 switchport mode access channel-group 1 mode passive no shutdown
- C. Interface range G1/1 - 1/3 switchport mode access channel-group 1 mode on no shutdown
- D. Interface range G1/1 - 1/3 switchport mode trunk
channel-group 1 mode desirable
no shutdown
Answer: A
NEW QUESTION # 49
How does MAC learning function?
- A. Associates the MAC address with the port on which it is received.
- B. Increases security on the management VLAN.
- C. Sends frames with unknown destinations to a multicast group.
- D. Rewrites the source and destination MAC address.
Answer: A
NEW QUESTION # 50
Refer to the exhibit.
What is the issue with the interface GigabitEthernet0/0/1?
- A. Cable disconnect
- B. duplex mismatch
- C. High throughput
- D. Port security
Answer: A
NEW QUESTION # 51
......
Get Ready to Pass the 200-301 exam Right Now Using Our CCNA Exam Package: https://www.exams4sures.com/Cisco/200-301-practice-exam-dumps.html
Enhance Your Career With Available Preparation Guide for 200-301 Exam: https://drive.google.com/open?id=1S4EmIVl7_MtWH73gQfer4dFBOrc7SHLJ