Latest Success Metrics For Actual FCSS_LED_AR-7.6 Exam (Updated 90 Questions)
Genuine FCSS_LED_AR-7.6 Exam Dumps Free Demo Valid QA's
NEW QUESTION # 38
In FortiLink NAC deployment, which FortiOS feature is used to evaluate endpoint posture before granting access?
Response:
- A. Static MAC filters
- B. NAC policy checks
- C. DHCP snooping
- D. Switch controller global status
Answer: B
NEW QUESTION # 39
In FortiManager CLI, how do you enable FortiAIOps monitoring?
Response:
- A. config system aiops → set enable
- B. FortiAIOps is enabled by default in managed mode
- C. config system global → set ai-monitor enable
- D. config aiops settings → set collection-mode full
Answer: B
NEW QUESTION # 40
Which command verifies FortiExtender signal strength on a FortiGate CLI?
Response:
- A. get extender status
- B. diagnose extender modem status
- C. diagnose wireless-controller wlac
- D. show extender radio
Answer: B
NEW QUESTION # 41
Which configuration elements are required to assign a VLAN to a FortiSwitch port?
(Choose two)
Response:
- A. Create a static route
- B. Define VLAN ID in FortiGate
- C. Assign VLAN to switch port profile
- D. Enable DHCP relay on VLAN
Answer: B,C
NEW QUESTION # 42
Which two use cases justify configuring automatic quarantine?
(Choose two)
Response:
- A. Bulk firmware upgrades
- B. IPS signature match on multiple packets
- C. Malware behavior detected by FortiClient EMS
- D. High CPU usage on a FortiAP
Answer: B,C
NEW QUESTION # 43
While configuring syslog, which protocol options are supported by FortiAuthenticator?
Response:
- A. UDP, TCP, and TLS
- B. Only TCP
- C. UDP and TCP
- D. Only UDP
Answer: A
NEW QUESTION # 44
What default port is used for FortiAuthenticator to send syslog messages over UDP?
Response:
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 45
Which two actions must be taken to configure FortiAuthenticator to send logs to a syslog server?
(Choose two)
Response:
- A. Enable LDAP debug
- B. Configure SNMP traps
- C. Specify syslog server IP and port
- D. Choose syslog facility
Answer: C,D
NEW QUESTION # 46
Which Fortinet components are typically involved in implementing NAC policies for wired and wireless networks?
(Choose two)
Response:
- A. FortiAnalyzer
- B. FortiManager
- C. FortiGate
- D. FortiAuthenticator
Answer: C,D
NEW QUESTION # 47
What are two requirements to enable digital certificate-based two-factor authentication on FortiAuthenticator?
(Choose two)
Response:
- A. Certificate Authority (CA) setup
- B. FortiAnalyzer integration
- C. Imported user certificates
- D. Syslog server configuration
Answer: A,C
NEW QUESTION # 48
You are configuring machine authentication on a FortiAuthenticator. Which settings must be enabled?
Response:
- A. set machine-auth enable
- B. bind LDAP group to policy
- C. set radius-auth enable
- D. define endpoint compliance profile
Answer: A
NEW QUESTION # 49
Which CLI automation action on FortiGate is used to define automatic quarantine based on event logs?
Response:
- A. config automation-stitch → set action-type quarantine-host
- B. config system automation-action → set action quarantine
- C. config user quarantine → set auto-log enable
- D. config log setting → set quarantine enable
Answer: A
NEW QUESTION # 50
Which two actions must be completed before a FortiGate can be provisioned using ZTP?
(Choose two)
Response:
- A. Set up DNS server for resolving FortiManager
- B. Assign a policy package to the device
- C. Manually configure VLANs
- D. Configure local admin password
Answer: A,B
NEW QUESTION # 51
What is the primary function of FortiAIOps in a LAN Edge deployment?
Response:
- A. Deploy firmware updates
- B. Monitor application-layer firewalls
- C. Collect NetFlow data
- D. Correlate and analyze operational data using AI
Answer: D
NEW QUESTION # 52
When configuring a FortiSwitch trunk port, which actions are needed?
(Choose two)
Response:
- A. Set native VLAN ID
- B. Enable RSTP
- C. Specify allowed VLANs
- D. Disable LLDP
Answer: A,C
NEW QUESTION # 53
What is the default RSSO attribute FortiAuthenticator uses to group users?
Response:
- A. CN
- B. Filter-ID
- C. Group-ID
- D. Class
Answer: B
NEW QUESTION # 54
What are the benefits of managing FortiSwitch using FortiManager over FortiLink?
(Choose two)
Response:
- A. Requirement for separate FortiAnalyzer
- B. CLI-only control for all switches
- C. Centralized policy and template deployment
- D. Backup configuration versioning
Answer: C,D
NEW QUESTION # 55
What is the primary function of a captive portal in guest Wi-Fi onboarding?
Response:
- A. Automatically redirect traffic to DNS
- B. Encrypt all packets using SSL
- C. Force client to use VPN
- D. Allow access only after user authentication or acceptance
Answer: D
NEW QUESTION # 56
You're configuring FortiAuthenticator to authenticate users via LDAP. Which syntax correctly defines the LDAP query filter to retrieve users from a specific OU named "Engineering"?
Response:
- A. (cn=Engineering)
- B. (OU=Engineering,DC=example,DC=com)
- C. (&(objectClass=person)(ou=Engineering))
- D. (ou=Engineering)
Answer: C
NEW QUESTION # 57
What is the primary outcome when a device is quarantined on a FortiGate-managed network?
Response:
- A. The device's MAC address is blocked by DNS filter
- B. The device is denied access to the network through policy enforcement
- C. The device is forced to reauthenticate using 802.1X
- D. The device is redirected to a captive portal for login
Answer: B
NEW QUESTION # 58
Which authentication methods can be used in FortiAuthenticator for two-factor authentication with digital certificates?
(Choose two)
Response:
- A. EAP-TLS
- B. Radius with push token
- C. EAP-PEAP
- D. SAML
Answer: A,D
NEW QUESTION # 59
Which FortiAnalyzer dashboard provides AIOps-related summaries and alerts?
Response:
- A. Incidents & Events > AIOps
- B. FortiView > System Events
- C. Log View > Threats
- D. Fabric View > AI-Powered Insights
Answer: A
NEW QUESTION # 60
Which encryption protocols can CAPWAP use to secure the data channel when communicating between a FortiGate wireless controller and FortiAP?
Response:
- A. DTLS and IPsec
- B. SSH and SSL
- C. WPA3 and TLS
- D. SSL/TLS and IPsec
Answer: A
NEW QUESTION # 61
What role does FortiAuthenticator play in a guest access workflow with FortiGate?
Response:
- A. Captures traffic logs
- B. Acts as a DHCP server
- C. Deploys firmware to clients
- D. Authenticates guest users via SMS or email
Answer: D
NEW QUESTION # 62
......
FCSS_LED_AR-7.6 Practice Test Give You First Time Success with 100% Money Back Guarantee!: https://www.exams4sures.com/Fortinet/FCSS_LED_AR-7.6-practice-exam-dumps.html
Printable & Easy to Use Fortinet Certified Solution Specialist FCSS_LED_AR-7.6 Dumps 100% Same Q&A In Your Real Exam: https://drive.google.com/open?id=1TSiKvcFo1EFpNZMDAcybZLoVjCTjj_sC