Master 2021 Latest The Questions IBM Cloud: Management and Platform and Pass C9560-519 Real Exam!
Penetration testers simulate C9560-519 exam PDF
NEW QUESTION 40 
Based on the exhibit, what is a correct omni.dat entry for the display servers?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 41
A company has deployed the SNMP probe. How can they generate a test event to validate rules file changes?
- A. telnet to the probe listening port and issue the command GENERATE EVENT
- B. edit the probe rules file and add the genevent function to generate an event
- C. connect to the probe HTTP interface with nco_probeeventfactory utility to generate a test event
- D. run the nco_sendtrap utility to generate a test trap to the probe listening port
Answer: B
NEW QUESTION 42
What can be specified by a -rulesfile command-line option when running the Probe Rules Syntax Checker?
- A. the full path and file name of the log file to write the syntax errors
- B. the default-original name of rules files of the specific Probe must be used
- C. the full path and file name of the configuration file to use the Probe Rules Syntax Checker.
- D. the full path and file name of the rules file to check
Answer: C
NEW QUESTION 43
A company has 1,000 Cisco switches in their environment that send approximately 5,000 traps each to the Netcool system in a 24 hour period. In addition to this, they have 5,000 servers and workstations; each sending approximately 100 syslog messages to IBM Tivoli Netcool/OMNIbus in the same time period.
Based on the scenario above, what is the calculated event rate per 24 hours?
- A. 1,000,000 events
- B. 5,500,000 events
- C. 2t500,000 events
- D. 6,000,000 events
Answer: D
NEW QUESTION 44
Which three statements are true regarding the Netcool MIB Manager?
- A. It imports SNMP MIB files and resolves MIB dependencies to build an Object Identifier (OlD) tree.
- B. It can be accessed through the Web GUI interface.
- C. It has a Web GUI interface to resolve MIB dependencies and show the results online using Web GUI.
- D. It can export some or all of the imported SNMP objects to Netcool rules files and other file formats.
- E. It can import Syslog files and generate the rules files to use with generic probe.
- F. It has a command-line interface that can be used to import MIB data and export rules files.
Answer: A,E,F
NEW QUESTION 45
The following listlU.sh was received from a client who is planning on upgrading to Web GUI V8.1. Which sequence of steps does the client need to follow to install and migrate the previousdata?
- A. Upgrade the version of TIP first, and then proceed with the installation using the same directory.
- B. Install over the existing Web GUI installation and the migration scripts will convert the data.
- C. Perform a fresh installation of V8.1, export from the current version, and import the data into V8.1.
- D. Upgrade DE to IBM Installation Manager (IM), use IM to install and migrate Web GUI.
Answer: B
NEW QUESTION 46
To have high visibility of their alarms, a client wants to project the Event Viewer to a wall of displays and must stay active for long periods. The client has decided to switch off session timeouts. Which two key factors must be considered by the client?
- A. occasional machine restart
- B. security concerns
- C. increase provisions in user management
- D. possible high system resources usage
- E. additional JRE requirements
Answer: B,E
NEW QUESTION 47
What are three ways to test the performance of new triggers that have been developed?
- A. Ensure that the data on which the tests are run is representative of the production system.
- B. Measure the effect on system performance by using profiling and by collecting trigger statistics.
- C. Ensure the contents of the master.sm_thresholds table can be viewed.
- D. Ensure that the number of rows in any table that the trigger accesses is representative of the production system.
- E. Ensure the content of the catalog.memstores table have been inspected.
- F. Ensure that the MessageLevel of the ObjectServer has been set to Info.
Answer: A,D,F
NEW QUESTION 48
Which statement is true regarding migrating SSL certificates and keys in IBM Trvoli Netcool/OMNIbus (Netcool/OMNIbus) V8.1?
- A. Key databases are stored in the NCHOME/etc/security/SSL directory. The Netcool/OMNIbus V8.1 key database file is named netcool.kdb.
- B. A different password must be used rather than the old omni.kdb database.
- C. Any required SSL certificates and keys must NOT be manually created or generated in the Netcool/OMNIbus V8.1 installation, because it is an automatic process.
- D. Certificates created in Netcool/OMNIbus V7.2 (and earlier) are stored in a format that is incompatible with V8.1.
Answer: A
NEW QUESTION 49
Below is sample output recorded in the ObjectServer profile log file
NCHOME/omnibus/log/NCOMS_profiler_report.log.
What would be reviewed to determine why client connections are taking 29.98 seconds of the ObjectServer granularity period?
- A. SQL commands issued through nco_sql
- B. SQL within the highest ObjectServer triggers
- C. event floods from the highest probe client
- D. Event List filters used by the highest desktop client
Answer: B
NEW QUESTION 50
Given the following outputs, which minimum conditions would allow runwaapi command below to display the report?
(root)# Vrunwaapi -file /opt/I BM/netcool/omnibus_webgui/waapi/etc/samples smuser -password netcool
-host 192.168.10.183
- A. user being used must have ncw_user, WebSphere started
- B. WebSphere must be started, ncw_admin assigned to root
- C. user smuser must be specified in waapi.init
- D. user being used must have ncw_admin role, WebSphere started
Answer: D
NEW QUESTION 51
Which two steps are taken to debug performance issues with the IBM Tvioli Netcool/OMNIbus ObjectServer triggers?
- A. enable ObjectServer profiling
- B. review the ObjectServer logfile for error messages
- C. enable ObjectServer Trigger debug mode
- D. review the Trigger Stats log file for problematic triggers
- E. disable all the triggers and enable them one-by-one looking for errors
Answer: D,E
NEW QUESTION 52
A display layer ObjectServer has been configured and started on a Linux server. Which IBM Tivoli Netcool/OMNIbus tool can be used to verify the ObjectServer is available?
- A. $NCHOME/omnibus/bin/nco_ping
- B. $NCHOME/omnibus/bin/nco_check_store
- C. $NCHOME/omnibus/bin/nco_elct
- D. $NCHOME/omnibus/bin/nco_osreport
Answer: C
NEW QUESTION 53
Which role is required to be able to create filters, views and maps?
- A. webggi_admin
- B. netcool_rw
- C. isc_admin
- D. ncw_admin
Answer: D
NEW QUESTION 54
Which statement is true when installing Web GUI and IBM Tivoli Netcool/OMNIbus (Netcool/OMNIbus) V8.1 on a Solaris platform?
- A. Web GUI and Netcool/OMNIbus are supported in 64-bit only.
- B. SUNWxwrtI and SUNWmfrun packages are required in Solaris 11.
- C. Solaris 10 requires the SUNWmfrun package.
- D. Web GUI is unsupported in Solaris.
Answer: A
NEW QUESTION 55
The omni.dat file is edited to specify both an unencrypted port and an SSL port. Which step must be performed next to enable communication to the ObjectServer using these ports?
- A. Ensure both ports are available and start the ObjectServer.
- B. Add the ObjectServer to the LDAP repository so the SSL port is secure.
- C. Launch the Servers Editor from a Windows client and use the Test button to confirm connectivity on each port.
- D. Run $NCHOME/bin/nco_igen to generate the interfaces file.
Answer: C
NEW QUESTION 56
Which property contains a list of names for Web GUI menus, without their extensions, to export when using the import/export tool?
- A. ExportMenuPlugin.inputs
- B. ExportMenuPlugin.system
- C. ExportMenuPlugin.input
- D. ExportMenuConflgPlugin.input
Answer: C
NEW QUESTION 57
Which two properties can be used to enable Store and Forward functionality in ObjectServer gateway configurations?
- A. Gate.Destination.SAFFile
- B. Gate.Writer.SAF
- C. Gate.Destination.SAF
- D. Gate.Writer.Store
- E. Gate.Writer.SAFFile
Answer: A,C
NEW QUESTION 58
A company has provided the following requirements
The company also requires Netcool/OMNIbus with LDAP for authentication. What are two benefits provided by integrating with LDAP?
- A. the Netcool/OMNIbus Administrator can change user passwords more simply
- B. ObjectServer multitenancy
- C. password-less authentication
- D. central repository for user management
- E. reduced Administrator overhead in managing ObjectServer users
Answer: A,C
NEW QUESTION 59
Which two values are valid for the ProcessType definition in the Process Agent configuration file?
- A. PA_DAEMON
- B. PaPA DAEMON
- C. PaPA_AWARE
- D. PaNOT_PA_AWARE
- E. PA_SCRIPT
Answer: C,D
Explanation:
Explanation
Can have the value PaPA_AWARE for PA aware processes and PaNOT_PA_AWARE for processes that are not PA aware. For more information about Process control awareness
NEW QUESTION 60
Which three statements are true regarding Accelerated Event Notification configuration using Netcool/OMNIbus Administrator?
- A. Configure post-insert, post-update, or post-reinsert triggers to act on accelerated events that are inserted or updated in the alerts.status table.
- B. Notification channels are not restricted to specific users.
- C. Set up channels to define the type of event data to be included in accelerated event notifications, and the recipients of this event data.
- D. Set up a dedicated event column to flag an event for acceleration, if required.
- E. IDUC must be set to at least 300 seconds for the AEN channel.
- F. Set up the conditions of notification flag in the probe rules file.
Answer: B,C,E
NEW QUESTION 61
Which functionality is provided by this probe configuration?
NHttpd.EnableHTTP: TRUE
NHttpd.ListeningPort: 2000
- A. remote administration of the probe
- B. enables IBM Installation Manager to remotely update and patch the probe
- C. interface for HTTP Eventstreams
- D. remote access to the probe to view Eventstreams
Answer: C
NEW QUESTION 62
......
Penetration testers simulate C9560-519 exam: https://www.exams4sures.com/IBM/C9560-519-practice-exam-dumps.html