[Sep-2025] UiPath UiPath-ADPv1 Dumps - Secret To Pass in First Attempt
UiPath UiPath-ADPv1 Exam Dumps [2025] Practice Valid Exam Dumps Question
NEW QUESTION # 59
What status needs to be selected in the Set Transaction Status activity in UiPath Studio so that the respective Queue Item will be retried?
- A. Failed
- B. Abandoned
- C. Postponed
- D. Retried
Answer: A
Explanation:
The Set Transaction Status activity in UiPath Studio is used to set the status of an Orchestrator queue item to Failed or Successful. This activity is usually placed at the end of the Process Transaction state in the REFramework template, after the Try Catch block. The status of the queue item determines whether it will be retried or not.
To retry a queue item, the status needs to be set to Failed. This means that the transaction was not completed successfully, and it needs to be processed again. The number of retries for a queue item depends on the MaxRetryNumber parameter in the Config file of the REFramework. By default, it is set to 2, which means that each queue item can be retried twice before it is marked as permanently failed.
The other options are not valid statuses for the Set Transaction Status activity. Option A is incorrect, because Retried is not a status, but a property of a queue item that indicates whether it has been retried or not. Option C is incorrect, because Abandoned is a status that is automatically assigned by Orchestrator to a queue item that has been in progress for more than 24 hours, and it cannot be retried. Option D is incorrect, because Postponed is a status that is automatically assigned by Orchestrator to a queue item that has a specific start date in the future, and it cannot be retried until that date is reached.
References: Activities - Set Transaction Status - UiPath Documentation Portal, REFramework documentation
- UiPath Documentation Portal, Set Transaction Status - Help - UiPath Community Forum, [Set Transaction Status - Orchestrator - UiPath Community Forum]
NEW QUESTION # 60
Which of the following examples accurately demonstrates using LINQ to perform data operations in a UiPath process?
- A. Applying LINQ to convert a list of integers to a JSON format by writing listOflntegers.ToJSON().ToList().
- B. Employing LINQ to concatenate two strings in a list by writing listOfStrings.Concatenate("String_1",
"String_2").ToList(). - C. Utilizing LINQ to split a DataTable into multiple smaller DataTables based on a specific condition by writing dataTable.Splitf'ColumnName = 'Condition'").CopyToData Tablet).
- D. Using LINQ to filter DataTable rows based on a specific condition by writing dataTable.AsEnumerable().Where(Function(row) row("ColumnName").ToString.Contains("Value")).CopyToDataTable().
Answer: D
Explanation:
LINQ (Language-Integrated Query) is a feature of .NET that allows you to write queries to manipulate data from various sources, such as arrays, collections, databases, XML, etc. LINQ can be used in UiPath Studio to perform complex data operations on variables of different types, such as DataTable, List, Array, etc. LINQ has two syntax forms: query syntax and method syntax. Both forms can achieve the same results, but they have different styles and preferences.
Option B is the correct answer because it demonstrates using LINQ method syntax to filter DataTable rows based on a specific condition. The expression dataTable.AsEnumerable().Where(Function(row) row("ColumnName").ToString.Contains("Value")).CopyToDataTable() does the following:
It converts the DataTable variable dataTable to an IEnumerable(Of DataRow) object using the AsEnumerable extension method1. This allows the use of LINQ methods on the DataTable.
It filters the rows of the DataTable based on a lambda expression using the Where extension method2.
The lambda expression Function(row) row("ColumnName").ToString.Contains("Value") returns true for the rows that have the value "Value" in the column named "ColumnName".
It converts the filtered IEnumerable(Of DataRow) object back to a DataTable using the CopyToDataTable extension method3. This returns a new DataTable that contains only the rows that match the condition.
The other options are incorrect because:
Option A is incorrect because it uses an invalid LINQ method Concatenate. The correct method to concatenate two strings in a list is Concat4, which takes two IEnumerable(Of T) objects as arguments and returns a new IEnumerable(Of T) that contains the elements from both sources. For example, listOfStrings.Concat(new List(Of String) {"String_1", "String_2"}).ToList().
Option C is incorrect because it uses an invalid LINQ method ToJSON. There is no such method in the LINQ library that can convert a list of integers to a JSON format. To achieve this, you need to use a JSON serializer, such as Newtonsoft.Json5, which provides methods to convert .NET objects to JSON and vice versa. For example, JsonConvert.SerializeObject(listOfIntegers).
Option D is incorrect because it uses an invalid LINQ method Split. There is no such method in the LINQ library that can split a DataTable into multiple smaller DataTables based on a specific condition. To achieve this, you need to use a group by clause in LINQ query syntax or a GroupBy extension method in LINQ method syntax6, which groups the rows of a DataTable by a key value and returns an IEnumerable(Of IGrouping(Of TKey, TElement)) object. Then, you can use a Select extension method to project each group into a new DataTable using the CopyToDataTable extension method. For example, dataTable.AsEnumerable().GroupBy(Function(row) row("ColumnName")).Select(Function(group) group.CopyToDataTable()).ToList().
References:
DataTableExtensions.AsEnumerable Method (System.Data) | Microsoft Docs
Enumerable.Where(Of TSource) Method (System.Linq) | Microsoft Docs
DataTableExtensions.CopyToDataTable(Of T) Method (System.Data) | Microsoft Docs Enumerable.Concat(Of TSource) Method (System.Linq) | Microsoft Docs Json.NET - Newtonsoft Grouping Data - C# | Microsoft Docs
NEW QUESTION # 61
A developer is building an automation which types text into a text file. The Activity Project Settings tor UI Automation Modern activities are set as follows:
The developer has configured the properties of a Type Into activity as follows:
What is the behavior of the Type Into activity when executing the workflow?
- A. The activity will use only properties set in Activity Project Settings.
- B. The activity will remove a Single Line in Run mode and in Debug mode.
- C. The activity will remove Multi Line in Run mode and a Single Line in Debug mode.
- D. The activity will remove a Single Line in Run mode and Multi Line in Debug mode.
Answer: D
Explanation:
The behavior of the Type Into activity when executing the workflow is that the activity will remove a Single Line in Run mode and Multi Line in Debug mode. This is because the activity has the Empty field property set to NEmptyFieldMode.SingleLine, which means that the activity will delete the existing content in the field by sending Ctrl+A and Delete keystrokes before typing the text. However, the activity also has the Debug mode property set to NEmptyFieldMode.MultiLine, which means that the activity will delete the existing content in the field by sending Ctrl+A, Shift+Home, and Delete keystrokes before typing the text. The Debug mode property overrides the Empty field property when the workflow is executed in Debug mode. Therefore, the activity will use different keystrokes to empty the field depending on the mode of execution. References:
[Type Into], [Empty Field], [Debug Mode]
NEW QUESTION # 62
What functionality does the Step Out action offer when a developer Is reviewing a process during debugging, as shown in the exhibit?
- A. Steps out and stops current execution.
- B. Executes activities in the current container and then pauses the execution
- C. Executes only one activity at a time and then pauses the execution
- D. Re-executes the activity which threw an exception.
Answer: B
Explanation:
The "Step Out" action in UiPath Studio's debugging tools allows the developer to finish executing the current container (such as a sequence, loop, or workflow) and returns to the next higher level in the call stack.
Essentially, it continues the execution of activities within the current container without stepping into any invoked workflows or activities.
The correct functionality provided by the "Step Out" action is:
D:Executes activities in the current container and then pauses the execution after stepping out to the next higher level in the call stack.
NEW QUESTION # 63
In a UiPath coded automation, what does the DelayAsync method do?
- A. It delays the start of the automation by a specified period of time.
- B. It adds a pause between the execution of each activity in the automation.
- C. It suspends execution asynchronously for a specified period of time.
- D. It delays the termination of the automation by a specified period of time.
Answer: C
Explanation:
In UiPath coded workflows (using the SDK for .NET), theDelayAsyncmethod is used tosuspend execution asynchronouslyfor a specified duration. This allows the rest of the application to remain responsive while the delay occurs in a non-blocking fashion.
Reference:UiPath Developer Guide > Coded Workflows > Async Methods
NEW QUESTION # 64
A developer designed a project in the REFramework. The "Config.xlsx" has me following Setting entry:
Assuming the default REFramework configuration, how can the developer reference the Setting in the Config variable to obtain the Setting value as a String from the dictionary?
- A. Config ("ProcessABCQueue"."OrchestratorQueueName").ToString
- B. Config ("OrchestratorOueueName ).ToString
- C. Config ("OrchestratorOueueName"." Process ABCQueue" )ToString
- D. Config ("ProcessABCOueue")ToString
Answer: B
NEW QUESTION # 65
What functionality does the Step Out action offer when a developer Is reviewing a process during debugging, as shown in the exhibit?
- A. Steps out and stops current execution.
- B. Executes activities in the current container and then pauses the execution
- C. Executes only one activity at a time and then pauses the execution
- D. Re-executes the activity which threw an exception.
Answer: B
Explanation:
The "Step Out" action in UiPath Studio's debugging tools allows the developer to finish executing the current container (such as a sequence, loop, or workflow) and returns to the next higher level in the call stack.
Essentially, it continues the execution of activities within the current container without stepping into any invoked workflows or activities.
The correct functionality provided by the "Step Out" action is:
D: Executes activities in the current container and then pauses the execution after stepping out to the next higher level in the call stack.
NEW QUESTION # 66
A project built using REFramework pulls phone numbers from a database of employees and creates queue items for each one. Following processing, these elements must be added to a financing application. The queue item holding a phone number becomes invalid if a digit is accidentally left out because of a human mistake.
As a requirement, queue items that contain partial numbers should not be accepted.
What type of error should be thrown according to best practices?
- A. System Exception
- B. Business Exception
- C. Application Exception
- D. Fatal Exception
Answer: B
Explanation:
The type of error that should be thrown according to best practices for queue items that contain partial numbers is Business Exception. A Business Exception is an exception that occurs due to an incorrect or incomplete input data or an expected business rule violation. A Business Exception indicates that the transaction item cannot be processed successfully and should be marked as failed in the queue. A Business Exception can be thrown by using the Throw activity in UiPath Studio, with the exception type set to UiPath.
Core.BusinessRuleException. Alternatively, a Business Exception can be thrown by using the Set Transaction Status activity in the REFramework, with the status set to Failed and the exception type set to Business Exception. References: [Business Exception vs Application Exception], [Throw], [Set Transaction Status]
NEW QUESTION # 67
What can be verified in the InltAIISettlngsTestCase test case?
- A. Verify If a certain key is present in the 'Config' dictionary.
- B. Verify If a certain application is open in the execution environment.
- C. Verify the naming of a certain key present in the 'Config' dictionary.
- D. Verify the variable type for the 'Config' dictionary.
Answer: A
Explanation:
In the InitAllSettingsTestCase test case, one of the verifications that can be done is to check if a certain key is present in the 'Config' dictionary. This ensures that necessary configurations are available for the process.
NEW QUESTION # 68
A developer is using the REFramework template to automate a process. In "SetTransactionStatus" file, there is the following sequence of activities, where the last Log Message activity was added by the developer:
The configuration for Add Log Fields and Remove Log Fields activities are shown below:
Add transaction log fields (Success)
The developer runs the process and notices the argument values for the first transaction are:
in_TransactionID = "07/18/2023 10:27:29"
io_TransactionNumber = 1
in_TransactionField1 = "UI235-80"
in_TransactionField2 = "Update Request"
Which of the following Log Message Details will be displayed when executing the activity Log Message Completed for the first transaction, considering it is successful?
- A. {"message": "Transaction Completed","level": "Information","logType": "User","timeStamp": "10:30:
19","fileName": "SetTransactionStatus","processVersion": "1.0.0","jobId": "f8a36a46-8ebc-40df-8f71-
26b39087ebee","robotName": "test.robot","machineId": 0,"logF_BusinessProcessName":
"Framework"} - B. {"message": "Transaction Completed","level": "Information","logType": "User","timeStamp": "10:30:
19","fileName": "SetTransactionStatus","processVersion": "1.0.0","jobId": "59325301-680a-4d55-a81b-
56ca1f369c12","robotName": "test.robot","machineId": 0,"logF_TransactionField2": ""," logF_TransactionStatus": "","logF_TransactionID":"logF_BusinessProcessName": "Framework"," logF_TransactionNumber": "","logF_TransactionField1": ""} - C. {"message": "Transaction Completed","level": "Information","logType": "User","timeStamp": "10:30:
19","fileName": "SetTransactionStatus","processVersion": "1.0.0","jobId": "cb865477-35f8-4c0a-93e9- e4f4246223f2","robotName": "test.robot","machineId": 0,"logF_TransactionField2": "Update Request","logF_TransactionID": "07/18/2023 10:27:29","logF_BusinessProcessName": "Framework"," logF_TransactionNumber": "1","logF_TransactionField1": "UI235-80","logF_TransactionStatus":
"Success"} - D. {"message": "Transaction Completed","level": "Information","logType": "User","timeStamp": "10:30:
19","fileName": "SetTransactionStatus","processVersion": "1.0.0","jobId": "59325301-680a-4d55-a81b-
56ca1f369c12","robotName": "test.robot","machineId": 0,"logF_TransactionField2": empty," logF_TransactionStatus": empty,"logF_TransactionID": empty,"logF_BusinessProcessName":
"Framework","logF_TransactionNumber": empty,"logF_TransactionField1": empty}
Answer: A
Explanation:
In the REFramework, the Add Log Fields activity is used to append additional information to the log messages. This information is stored in the form of custom fields. In this scenario, Add Log Fields (Success) activity is adding several fields with the transaction details whenever a transaction is successful.
The Remove Log Fields activity is then used to delete these custom fields to prevent them from appearing in subsequent log messages. This is important to ensure that only relevant information is logged for each transaction and to avoid cluttering the logs with outdated information.
When the Log Message Completed activity is executed after the Remove Log Fields activity, it should log the message without the additional fields that were added by the Add Log Fields activity since they have been removed. This means that the log message should only include the standard fields like message, level, logType, timeStamp, fileName, processVersion, jobId, robotName, and machineId, without the custom fields like logF_TransactionStatus, logF_TransactionNumber, etc.
Based on the options provided and the understanding of the REFramework's logging mechanism, the correct answer should be:
D: { "message": "Transaction Completed", "level": "Information", "logType": "User", "timeStamp": "10:30:
19", "fileName": "SetTransactionStatus", "processVersion": "1.0.0", "jobId": "f8a36a46-8ebc-40df-8f71-
26b39087ebee", "robotName": "test.robot", "machineId": 0, "logF_BusinessProcessName": "Framework" } This option is correct because it shows a log message after the removal of custom fields, retaining only the logF_BusinessProcessName field, which wasn't specified to be removed according to the provided information.
NEW QUESTION # 69
Which activity should a developer use to add custom information to logs related to transactions for tracing purposes?
- A. Build Log
- B. Add Log Fields
- C. Update Logs
- D. Add Custom Log
Answer: B
Explanation:
The Add Log Fields activity enables you to add custom information to logs related to transactions for tracing purposes1. The activity takes a collection of string arguments as input, which are added to every subsequent log message throughout the entire workflow, unless a Remove Log Fields activity is used1. The custom log fields can be useful for adding more information and visibility to the logs, especially for transactional data processes2. For example, you can use the Add Log Fields activity to add the transaction ID, the transaction status, the business process name, or any other relevant data to the logs2. Therefore, the correct answer is A.
Add Log Fields.
NEW QUESTION # 70
What is the default priority value for the Job Priority field in UiPath Orchestrator when starting a job manually?
- A. Inherited
- B. Medium
- C. Low
- D. High
Answer: A
Explanation:
When starting a job manually in UiPath Orchestrator, the default priority value for the Job Priority field is Inherited. This means that the job inherits the priority value that was set at the process level when the package was deployed. The possible priority values are High, Normal, and Low. The priority value determines the order in which the jobs are executed by the robots, with higher priority jobs being executed first. The priority value can be changed manually when starting a job, or it can be set dynamically using the Start Job activity in a workflow. References: [Starting a Job], [Job Priority]
NEW QUESTION # 71
What method can be used to change the index of an existing column in a datatable?
- A. Move At
- B. SetColumnlndex
- C. Setlndex
- D. SetOrdinal
Answer: D
NEW QUESTION # 72
What is the purpose of credential stores in UiPath Orchestrator?
- A. To store non-sensitive data and configuration settings for UiPath Studio projects.
- B. To store Orchestrator event loos and related data for auditing purposes.
- C. To serve as a centralized location for storing pre-built automation workflows and processes.
- D. To securely store sensitive data such as Robot credentials and Credential Assets for use in automation processes.
Answer: D
Explanation:
The purpose of credential stores in UiPath Orchestrator is to securely store sensitive data such as Robot credentials and Credential Assets for use in automation processes. Credential stores are external services that provide encryption and protection for sensitive data. Orchestrator can integrate with various credential stores, such as CyberArk, Azure Key Vault, and HashiCorp Vault, and use them to store and retrieve the credentials for the Robots and the Credential Assets. Credential Assets are global variables that can store passwords, usernames, API keys, and other confidential information. By using credential stores, the developer can ensure that the sensitive data is not exposed or compromised, and that the automation processes can access the data securely and efficiently. References: [Credential Stores], [Credential Assets]
NEW QUESTION # 73
In an RPA Testing project, you created the mock "MySequencemock" for the file "MySequence". You have to update "MySequence" and add a Log Message activity and a Verify Expression activity.
What will happen to "MySequencemock" file when you save the project, assuming that the file is closed?
- A. The changes made in "MySequence" workflow file are not applied to the mock file.
- B. Only the Verify Expression activity will be added to the mock file.
- C. The changes made in "MySequence" workflow file are applied to the mock file.
- D. Only the Log Message activity will be added to the mock file.
Answer: C
Explanation:
A mock file is a copy of a workflow file that is used for testing purposes, where some activities are replaced by mock activities that simulate the expected behavior1. A mock file can be created by selecting Mock workflow under test in the Create Test Case window2. The mock file is stored in the Project > Mocks folder, and it has the same name as the original workflow file, with the suffix "_mock" added2. For example, if the original workflow file is named "MySequence.xaml", the mock file will be named
"MySequence_mock.xaml".
When a mock file is created, the changes made in the original workflow file are automatically applied to the mock file when the project is saved2. This means that any new activities or modifications in the original workflow file are reflected in the mock file, except for the activities that are surrounded by mock activities2.
The mock activities are not affected by the changes in the original workflow file, and they can only be edited within the mock file2.
Therefore, if you update "MySequence" and add a Log Message activity and a Verify Expression activity, and then save the project, the changes will be applied to the mock file, assuming that the file is closed. This means that the mock file will also have the Log Message activity and the Verify Expression activity added, unless they are inside a mock activity
NEW QUESTION # 74
Given a dataiable "dt" with the following header:
"Surname. Address. Zip Code, Given Name, Phone Number.
What is the correct configuration of the Invoke Method activity so that the resulting header will be:
"Surname. Given Name. Address. Zip Code. Phone Number".
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 75
In the Global Exception Handler, which arguments are provided by default and should not be removed?
- A. errorinfo with the "In" direction result with the *ln/Ouf direction
- B. errorinfo with the "Out" direction result with the "In/Out" direction
- C. errorinfo with the "In" direction result with the "Out" direction
- D. errorinfo with the "In" direction result with the "In" direction
Answer: C
Explanation:
The Global Exception Handler is a type of workflow that determines the project's behavior when encountering an execution error. It has two arguments that are provided by default and should not be removed.
They are:
errorinfo: This argument has the "In" direction and it stores information about the error that was thrown and the workflow that failed. It can be used to log the error details, get the name of the activity that caused the error, or count the number of retries1.
result: This argument has the "Out" direction and it is used to specify the next action of the process when it encounters an error. It can have one of the following values: Continue, Ignore, Retry, or Abort. These values determine whether the exception is re-thrown, ignored, retried, or stops the execution1.
The other options are not correct, because they either have the wrong direction for the arguments, or they use the "In/Out" direction, which is not valid for the Global Exception Handler arguments1.
References:
1: Studio - Global Exception Handler - UiPath Documentation Portal
NEW QUESTION # 76
A developer designed a project in the REFramework. The "Config.xlsx" has me following Setting entry:
Assuming the default REFramework configuration, how can the developer reference the Setting in the Config variable to obtain the Setting value as a String from the dictionary?
- A. Config ("ProcessABCQueue"."OrchestratorQueueName").ToString
- B. Config ("OrchestratorOueueName ).ToString
- C. Config ("OrchestratorOueueName"." Process ABCQueue" )ToString
- D. Config ("ProcessABCOueue")ToString
Answer: B
NEW QUESTION # 77
When working with a long-running workflow involving form actions in Action Center, how is the job resumed after it has been suspended?
- A. The job resumes immediately when the form action is created, without waiting for completion.
- B. The job resumes automatically after 30 minutes if the form action is not completed.
- C. The job resumes when any user with View permissions on Actions approves the form.
- D. The job resumes only after the assigned user completes the form action.
Answer: D
Explanation:
In long-running workflows, when aform actionis sent toAction Center, the job issuspendeduntil the form is completed by theassigned user. Only uponcompletion of the actiondoes the job resume execution. This ensures that business-critical human validation is accounted for before the process continues.
Reference:UiPath Action Center Guide > Long-Running Workflows > Human-in-the-loop
NEW QUESTION # 78
The following table is stored in a variable called "dt".
Which query can be used to extract the table column names and store them in a list?
- A. dt.Columns.Select(function(x) x.ColumnName).ToList()
- B. dt.AsEnumerable.Select(function(x) x.ColumnName).ToList()
- C. dt.Columns.Cast(Of Datacolumn).Select(function(x) x.ColumnName).ToList()
- D. dt.Columns.Cast(Of Datacolumn).Select(function(col) col).ToList()
Answer: C
Explanation:
The DataTable object in UiPath is a representation of a table with rows and columns that can store data of various types. It has a Columns property that returns a collection of DataColumn objects that describe the schema of the table1. To extract the column names from a DataTable and store them in a list, you can use the following query:
dt.Columns.Cast(Of Datacolumn).Select(function(x) x.ColumnName).ToList() This query does the following:
* It casts the Columns collection to a generic IEnumerable(Of DataColumn) using the Cast(Of T) extension method2. This is necessary because the Columns collection is a non-generic IEnumerable that cannot be used with LINQ methods directly3.
* It selects the ColumnName property of each DataColumn object using the Select extension method and a lambda expression4. The ColumnName property returns the name of the column as a string5.
* It converts the resulting IEnumerable(Of String) to a List(Of String) using the ToList extension method6.
The other options are incorrect because:
* Option B does not cast the Columns collection to a generic IEnumerable(Of DataColumn), which will cause a runtime error.
* Option C uses the AsEnumerable extension method, which returns a collection of DataRow objects, not DataColumn objects7. Therefore, the ColumnName property will not be available.
* Option D selects the whole DataColumn object instead of its ColumnName property, which will result in a list of DataColumn objects, not strings.
References:
* DataTable Class (System.Data) | Microsoft Docs
* Enumerable.Cast(Of TResult) Method (System.Linq) | Microsoft Docs
* DataColumnCollection Class (System.Data) | Microsoft Docs
* Enumerable.Select(Of TSource, TResult) Method (System.Linq) | Microsoft Docs
* DataColumn.ColumnName Property (System.Data) | Microsoft Docs
* Enumerable.ToList(Of TSource) Method (System.Linq) | Microsoft Docs
* DataTableExtensions.AsEnumerable Method (System.Data) | Microsoft Docs
NEW QUESTION # 79
......
UiPath-ADPv1 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions: https://www.exams4sures.com/UiPath/UiPath-ADPv1-practice-exam-dumps.html
UiPath-ADPv1 Dumps - Grab Out For [NEW-2025] UiPath Exam: https://drive.google.com/open?id=1Q3l6dN5_Xf7R0JyX_ijZ0MXj-PcFE4Xj