Steps Necessary To Pass The NCP-5.15 Exam from Training Expert Exams4sures
Valid Way To Pass Nutanix Certified Professional (NCP)'s NCP-5.15 Exam
NEW QUESTION 80
A two-node ROBO cluster is configured with a witness VM.
What happens when Node A goes down?
- A. The- cluster becomes unavailable and goes into read-only mode.
- B. The cluster is unaffected and no administrator intervention is required.
- C. All operations and services on the Node B are shut down and go into a waiting state.
- D. Node B sends a leadership request to the Witness VM and goes into single-node mode.
Answer: D
NEW QUESTION 81
An administrator is configuring cross-hypervisor DR from an ESXi cluster to a new AHV cluster. When the administrator migrates a protection domain to the AHV cluster, the VMs fail to boot.
What should the administrator do to correct this problem?
- A. Increase the snapshot frequency to more than 6 hours.
- B. Add all VMs into a single consistency group.
- C. Uninstall VMware Tools from the VMs.
- D. Install Nutanix Guest Tools in the protected VMs.
Answer: A
NEW QUESTION 82
An administrator needs to take a single node down for maintenance. Which two steps should the administrator take? (Choose two)
- A. Reclaim the licenses to the Nutanix Support Portal.
- B. Shut down or live migrate all VMs off of the node.
- C. Verify the data resiliency status of the cluster.
- D. Make sure Auto Evacuation is enabled
Answer: B,C
Explanation:
https://portal.nutanix.com/page/documents/details/?targetId=AHV-Admin-Guide-v51:AHV-Admin-Guide-v51
NEW QUESTION 83
In respective to 1 GbE and 10 GbE interfaces (physical host), which statements are true?
- A. If you want to use the 10 GbE interfaces for guest VM traffic, make sure that the guest VMs do not use the VLAN over which the Controller VM and hypervisor communicate.
- B. Do not include the 1 GbE interlaces in the same bond as the 10 GbE interlaces. Also, to avoid loops, do not add the 1 GbE interlaces to bridge brO, either individually or in a second bond. Use them on other bridges.
- C. If you want to use the 1 GbE interfaces for guest VM connectivity, follow the hypervisor manulacturer's switch '- port and networking configuration guidelines.
Answer: A,B
NEW QUESTION 84
Which method can be used to migrate a VM configured for UEFI-boot from a Nutanix Hyper-V cluster to AHV?
- A. Cloud Connect
- B. Storage vMotion
- C. Live Migration
- D. Nutanix Move
Answer: D
NEW QUESTION 85
How will an HDD failure affect VMs with data on the failed device?
- A. The VMs will remain operational on that host and continue to function normally with no noticeable impact
- B. A live migration will be initiated, moving the affected VMs to a host that contains the replica data.
- C. The VMs will crash, and will be restarted once the failed HDD has been replaced and the data has been restored.
- D. An HA event will occur, causing the affected VMs to restart on a node that contains the replica data.
Answer: D
NEW QUESTION 86
When license needs to be reclaimed from Host: ( Choose 2)
- A. If you move nodes from one cluster to another , First reclaim the licenses, move the nodes, Then Re-Apply lincences
- B. While Destroying the Cluster
- C. Return licences to your Inventory when you remove one or more nodes from cluster
Answer: A,B
NEW QUESTION 87
Which SSL Files required for Importing Key and certificate (Choose 2)
- A. Public Certificate
- B. Private Certificate
- C. CA Certificate
- D. Private Key
Answer: A,D
NEW QUESTION 88
When creating a VM on an AHV cluster, how is the initial placement of the VM determined?
- A. The administrator right clicks on the desired host and selects Power on VM from the dropdown menu
- B. AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of their UUID
- C. Placement is determined by the host that holds the new_VM token at the time of VM creation
- D. The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration
Answer: D
NEW QUESTION 89
A two-node ROBO cluster is configured with a witness VM.
What happens when Node A goes down?
- A. The- cluster becomes unavailable and goes into read-only mode.
- B. The cluster is unaffected and no administrator intervention is required.
- C. All operations and services on the Node B are shut down and go into a waiting state.
- D. Node B sends a leadership request to the Witness VM and goes into single-node mode.
Answer: D
NEW QUESTION 90
What is Prism Central primarily used for?
- A. Container creation
- B. Multi-cluster Single Sign On
- C. Multi-cluster network configuration
- D. Data reduction configuration
Answer: B
NEW QUESTION 91
What should be validated as part of the customer's troubleshooting process?
- A. The VLAN has been configured to use the proper bridge.
- B. The VLAN is configured on the trunk of the upstream switch.
- C. The VLAN has the proper gateway configured in the network settings in Prism.
- D. The VLAN is unique to the Nutanix cluster, and not in use elsewhere in the network.
Answer: C
NEW QUESTION 92
What command places a host in maintenance mode in AHV?
- A. ncli maintenance_mode host=host_id
- B. acli maintenance_mode.host host_id
- C. acli host.enter_maintenance_mode host_id
- D. ncli host maintenance host_id
Answer: C
NEW QUESTION 93
Two HDDs fail simultaneously on a single AHV host.
What are the chances of data loss?
- A. 100%
- B. 0%
- C. 25%
- D. 50%
Answer: B
NEW QUESTION 94
An administrator is adding a node with a higher AOS release to an existing cluster.
What is the most efficient action an administrator should take to ensure it is in a supported state?
- A. Add the node to the cluster and reboot all running VMs to use new release
- B. Perform standalone reimage of the new node and then add to cluster
- C. Destroy cluster and foundation with the new node in place
- D. Add the node to the cluster and leave the existing AOS version in place
Answer: B
NEW QUESTION 95
what information is shared through pulse? multi answer
- A. system level statistics
- B. metadata
- C. system alerts
- D. identification data
Answer: A,C
NEW QUESTION 96
When installing Nutanix Guest Tools (NGT) on an ESXi-hosted VM, which port should be enabled on the VM to allow communication with the NGT-Controller VM service?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 97
what command is used to run the nutanix cluster checks from the CVM CLI?
- A. ncc run_all_health_check
- B. ncc health_check run_all
- C. ncc check_all health_options
- D. ncc check_health run_all
Answer: B
NEW QUESTION 98
How many Prism Central instances are required to deploy Leap:'
- A. One per customer environment
- B. One per physical site
- C. One per availability zone
- D. One per AHV cluster
Answer: C
NEW QUESTION 99
An administrator wants to make sure that the health of a cluster is in a good state.
Which command the utility will provide information related to the health of the cluster?
- A. generic status
- B. top
- C. ncc
- D. iostat
Answer: C
NEW QUESTION 100
A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.
What is the effect on the replicas of the VMs?
- A. No VMs lose data because of RF2
- B. No VMs lose data if the node has two or more SSDs
- C. Some VMs may reboot and gain access to data
- D. Some VM data may be lost
Answer: D
Explanation:
Reference: https://next.nutanix.com/how-it-works-22/disk-fault-tollerance-8822
NEW QUESTION 101
When creating Windows 2016 Server VM on AHV, what must be available during the OS installation process?
- A. virtIO drivers
- B. Nutanix Guest Tools
- C. Nutanix Move
- D. Bootable USB
Answer: A
NEW QUESTION 102
What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?
- A. The impacted host and VMs will automatically shut down.
- B. VM High Availability will restart the impacted VMs on another host
- C. A Live Migration will be performed on the affected VMs.
- D. The host will automatically redirect I/O and VMs will continue running.
Answer: D
NEW QUESTION 103
......
Who should take the Nutanix NCP-5.15 Exam
A badge of honour, Nutanix Professional Certifications are intended to recognise the expertise and experience you have learned to successfully launch, operate, leverage and scale the Business Cloud. Gaining these certifications validates your demonstrated expertise and ability to lead your business in the next step of your Corporate Cloud journey. This exam is for those prefessionals having a backgound on cloud-computing.
- Cloud-Computing professional
All NCP-5.15 Dumps and Nutanix Certified Professional - Multi cloud Infrastructure Training Courses: https://www.exams4sures.com/Nutanix/NCP-5.15-practice-exam-dumps.html