Sep-2021 Latest Exams4sures NCP-5.15 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new NCP-5.15 Real Exam Questions!
NEW QUESTION 55
An administrator is adding a node with a higher AOS release to an existing cluster.
What is the most efficient action an administrator should take to ensure it is in a supported state?
- A. Perform standalone reimage of the new node and then add to cluster
- B. Add the node to the cluster and reboot all running VMs to use new release
- C. Destroy cluster and foundation with the new node in place
- D. Add the node to the cluster and leave the existing AOS version in place
Answer: C
NEW QUESTION 56
Refer to Exhibit.
An administrator increases the cluster RF to 3. The containers are not modified.
What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?
- A. Zookeeper = 2 and Extent Groups = 1
- B. Zookeeper = 1 and Extent Groups = 1
- C. Zookeeper = 1 and Extent Groups = 2
- D. Zookeeper = 2 and Extent Groups = 2
Answer: C
NEW QUESTION 57
Which two items are required to manually upload an AOS update to a Nutanix Cluster? (Choose two)
- A. AOS zip file
- B. AFS Binary file
- C. JSON file
- D. AOS Binary
- E. YML file
Answer: C,D
NEW QUESTION 58
An administrator finds that guest VMs are offline and storage is unavailable. The administrator needs to know if any process within the CVMs on the nutanix cluster are experiencing crashes.
Which log file should the administrator locate to determine if any processes have crashed?
- A. WARN logs
- B. INFO logs
- C. FATAL logs
- D. ERROR logs
Answer: C
NEW QUESTION 59
An administrator wants to have a VM on an AHV cluster with access to multiple VLANs. What is the most efficient way to achieve this?
- A. Use one vNIC per VLAN for the VM.
- B. Create a network in AHV associated with all those VLANs on all hosts.
- C. Use SFPs that allow the needed VLANs.
- D. Update a vNIC on the VM to operate in trunked mode for all desired VLANs.
Answer: D
NEW QUESTION 60
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. Email Digest
- B. Syslog
- C. Individual Alerts
- D. SNMP
Answer: A
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_manag Prism Central allows you to configure the alert messages sent by . To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case.
Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
* Do one of the following:
* In the gear icon pull-down list of the main menu, select Alert Email Configuration.
* In the Alerts dashboard, click the
The Alert Email Configuration window appears.
* Click the Settings tab and do the following:
* Enable Prism Central
* Check the Email Every Alert box to send an email whenever the event occurs.
* Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
* Check the Nutanix Support box to send alert notification to Nutanix customer support.
* To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
* Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
NEW QUESTION 61
An administrator is working with Nutanix Support and needs to provide logs for troubleshooting an issue. The cluster is located in a secure environment. Data such as IP addresses and VM names cannot be shared.
Which method should be used to anonymize the log data sent to Nutanix Support?
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 62
What are the two effects of using Data-at-Rest Encryption on a Nutanix cluster? (Choose two.)
- A. Native KMS requires minimum of a four-node cluster.
- B. Encryption is only supported on an empty cluster.
- C. An External KMS server must exist outside of the encrypted cluster.
- D. Software-based Data-at-Rest Encryption cannot be disabled.
Answer: C,D
NEW QUESTION 63
which cli is used to run this command? (cluster version)
- A. ecli
- B. ncli
- C. bash shell
- D. acli
Answer: B
NEW QUESTION 64
A Nutanix administrator receives a request from the networking team to start SNMP Traps to their central reporting solution. The administrator creates the transport. The central monitoring tool is not able to clearly read the SNMP traps that are being sent.
What does the administrator need to provide to read SNMP traps correctly?
- A. Nutanix MIB file.
- B. Cluster Virtual IP address
- C. SNMP Trap Port
- D. TCP/IP address
Answer: A
NEW QUESTION 65
An administrator encounters an error in Prism. After searching through the Nutanix product documentation and knowledge Base the administrator decides to engage Nutanix Support for further assistance.
Which three items will help Nutanix Support to triage and resolve this error most efficiently? (Choose Three)
- A. Detailed Description
- B. Log Bundle
- C. NCC output
- D. Cluster Name
- E. Licensing Information
Answer: A,B,C
NEW QUESTION 66
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Add a new switch to the network and connect 1Gb interfaces to it.
- B. Change the VLAN ID to a higher priority ID.
- C. Change the bond mode to balance-slb or balance-tcp.
- D. Connect the 10Gb interfaces to the physical switch.
- E. Remove any 1Gb interfaces still connected from the default bond.
Answer: B,C,D
NEW QUESTION 67
An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.
What is the Likely issue?
- A. The VM needs to have a standard disk attached before it can boot to a CD.
- B. The bootable CD image is corrupted during creation.
- C. The CD-ROM interface is too slow.
- D. The administrator selected a disk attached before it can boot to a CD.
Answer: B
NEW QUESTION 68
Which CVM service is primary responsible for handling all metadata operation with a Nutanix cluster?
- A. Stargate
- B. Genesis
- C. Cassandra
- D. Zeus
Answer: C
NEW QUESTION 69
An administrator wants to configure key based SSH access for an AOS 5.5 Implementation Which three components can be secured using this method?
- A. prism element
- B. The cluster
- C. The hypervisor host
- D. the CVM
- E. Guest virtual machine
Answer: B,C,D
NEW QUESTION 70
Refer to the exhibit.
The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.
What step should be taken to grant the proper access?
- A. Add the hosts to the entities KM for the role.
- B. Add the role to the Linux images.
- C. Grant the admin1 user the viewer role (or the cluster.
- D. Add the proper category to each Linux VM.
Answer: A
NEW QUESTION 71
An administrator is deploying a SQL database that is licensed by the number of physical CPU cores available to the application.
Which feature can be used to minimize licensing costs?
- A. Virtual NUMA
- B. VM Anti-Affinity
- C. Host Affinity
- D. Host Profiles
Answer: C
NEW QUESTION 72
Which bond mode is the default mode on an AHV Nutanix cluster?
- A. Balance TCP
- B. Link Aggregation
- C. Balanced SLB
- D. Active - Backup
Answer: D
NEW QUESTION 73
An administrator is preparing to migrate VMs from a legacy ESXi cluster to a new AHV cluster.
Which action must be the administrator perform on the AHV cluster to migrate VM data?
- A. Whitelist the ESXi cluster IP address
- B. Install the Nutanix Virt0 drivers
- C. Create placeholder VMs
- D. Install Nutanix Self servicing restore.
Answer: A
NEW QUESTION 74
The feature that enables you to back up and restore copies of virtual machines and files to and from an on-prem cluster and a Nutanix Controller VM on the Amazon Web Service (AWS) or Microsoft Azure cloud.
- A. XI-Leap
- B. Cloud Connect
- C. Acropolis Block Service
Answer: B
Explanation:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v55%3Awc-remote-site-configuration-c.html
NEW QUESTION 75
Where should an administrator go to check upgrade compatibility between different AOS versions?
- A. The Upgrade Matrix Page in Life Cycle Management.
- B. The Upgrade Paths page on the Support Portal
- C. The Upgrade compatibility page in life Cycle Management.
- D. The Upgrade Path page in Prism Central.
Answer: A
Explanation:
https://portal.nutanix.com/page/documents/kbs/details/?targetId=kA00e000000LMgICAW
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v511:wc-cluster-expand-wc-t.html
https://stonefly.com/blog/storage-snapshot-technology-techniques-and-details AOS tracks snapshots with a fine-grained redirect-on-write algorithm that allows fine-grained control and maximizes both efficiency and performance. Clone hundreds of new workloads in seconds, and create deep snapshot chains without impacting applications.
NEW QUESTION 76
An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.
How should the administrator fix this issue?
- A. Add more memory to the VM.
- B. Migrate the VM to a different host.
- C. Reduce the amount of memory assigned to the VM.
- D. Increase the memory on the CVM.
Answer: B
NEW QUESTION 77
......
Resources From:
- 2021 Latest Exams4sures NCP-5.15 Exam Dumps (PDF & Exam Engine) Free Share: https://www.exams4sures.com/Nutanix/NCP-5.15-practice-exam-dumps.html
Free Resources from Exams4sures, We Devoted to Helping You 100% Pass All Exams!